TL;DR: POS Board 4G Module Interface
AndroidSBC software desk: Android 15 baseline and staged OTA channel published for the WF-P family serving Edmonton, Canada. The WF-P3399 POS Android motherboard spans the dual-screen high definition POS with 4K promotion wall and eleven sister models in the WF-P series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 SoC with the ARM Mali-T860 MP4 GPU, HDMI 2.0 plus eDP output at 4K@60Hz, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Edmonton and Canada importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.
About AndroidSBC and the POS Android Motherboard Family
For Edmonton integrators the WF-P family answers the question that usually blocks a rollout: will the board drive both the cashier screen and the customer display, and will the cash drawer fire on the right pulse. AndroidSBC ships the dual-screen configuration, the RJ11 or RJ12 drawer header and the printer handshake as a validated set, not as a list of interfaces on a datasheet. Each production lot is burned in for 72 hours with the display, the touch panel and the printer loop running, and the serial number is logged against the test record so aan Edmonton partner can trace a single board back to its run.
WF-P3399 Technical Specifications
| Parameter | AndroidSBC WF-P3399 (dual-screen high definition POS with 4K promotion wall) | Industry Average |
|---|---|---|
| Processor | RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 28nm | Older 28nm or 40nm process |
| GPU | Mali-T860 MP4 | Older Mali-450 or basic GPU |
| NPU / AI | none | No NPU on competing entry boards |
| Memory | 4GB LPDDR4 | DDR3 1GB / 2GB on competing boards |
| Storage | 64GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | HDMI 2.0 plus eDP output at 4K@60Hz | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 11 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 5 plus Bluetooth 5.0 plus Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| POS peripherals | Thermal printer, receipt printer, barcode scanner, cash drawer, customer display | No bundled printer, scanner or drawer driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3399 (dual-screen high definition POS with 4K promotion wall) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Canada importers sourcing the WF-P family, the WF-P3399-A variant is the typical configuration for the flagship store checkout plus media wall use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing POS Android Motherboards for Canada Buyers
Dual-screen POS is where most competing boards fail quietly. They list two display interfaces, but the second lane is a mirror rather than an independent framebuffer, so the customer display cannot carry a separate promotion loop.
The fiscal layer is handled in firmware. Receipt templates, log retention and the fiscal printer handshake are configured before shipment, and the Port of Vancouver lane is booked against a production slot so the Edmonton pilot batch lands inside the store opening window. AndroidSBC logged the 4th shipment to Edmonton on September 23, 2026 - 79500 boards on the Vancouver - Shanghai lane, each serialised against its burn-in record and each carrying the same firmware baseline.
Competitive Comparison: WF-P3399 vs Competing POS Android Boards
What follows is not a spec-sheet comparison. It is the four questions aan Edmonton chain asks after its first failed rollout.
- Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
- Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.
Global POS Terminal and Smart Checkout Market Trends
Unattended and self-service formats are the segment where the board specification bites hardest. A cabinet on a forecourt or in a store entrance has no staff to reset it, so the dual-screen high definition POS with 4K promotion wall has to hold a watchdog, an RTC and a clean auto-recovery path.
- Entry counter tier: WF-P3399 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
- Dual-screen mainstream tier: WF-P6180 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
- AI and unattended tier: WF-P5270 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.
For Edmonton partners the commercial conclusion is that the board vendor has to be a factory. A trading company cannot hold a BOM across a three-year refresh.
Partner Success Story: Nordweg Kasse Systemer (convenience chain POS integrator)
A Nordweg Kasse Systemer programme in the Nordic convenience retail segment illustrates how the WF-P family from AndroidSBC supports Edmonton integrators on the ground. Nordweg Kasse Systemer deployed 79500 WF-P boards across 140 convenience counters.
- OEM relationship: AndroidSBC private-label SKU shipped with Nordweg Kasse Systemer branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus ISED Canada conformity, all bundled into the Shenzhen source-factory shipment.
As Nordweg Kasse Systemer Technical Director for Nordic Convenience Retail explained: Nordweg Kasse Systemer picked the WF-P board because the receipt printer and the cash drawer fired correctly on the sample unit, and 79500 boards went into the Edmonton estate without a driver change.
Field Report: flagship store checkout and media wall installation
NANSHAN, September 23, 2026 - Gong Li, AndroidSBC field desk. The WF-P3399 board designated for the dual-screen high definition POS with 4K promotion wall application was pulled from the same production lot as the pilot batch, so the Canada team received an identical configuration. The WF-P3399 POS Android motherboard order for Edmonton, Canada cleared the burn-in station on schedule and is en route via the Vancouver - Shanghai lane.
The WF-P3399 dual-screen high definition POS with 4K promotion wall production lot includes the WF-P3399-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Canada integrators, the ISED Canada conformity plus ISED certification with a CSA or UL safety listing paperwork is bundled.
Filed by Gong Li, AndroidSBC field desk, NANSHAN. Canadian grocery groups want bilingual receipt templates and ask for the Interac flash contactless path to be demonstrated on the sample unit.
WF-P3399 Application Scenarios
The WF-P3399 dual-screen high definition POS with 4K promotion wall sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3399-A configuration is the typical build for the flagship store checkout plus media wall use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.
- Supermarket and hypermarket checkout: the WF-P3399 drives the cashier screen while the second lane carries the customer display or the promotion wall in Edmonton.
- Convenience and small format stores: the WF-P7600 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
- Restaurants and quick service: the WF-P7601 runs the order screen plus a kitchen display output, with the customer display showing the order total.
- Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
- Unattended retail and vending: the WF-P7602 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
- Fuel forecourts and parking: the WF-P3600 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
- Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
- AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
- Retrofit programmes in Edmonton: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.
Partnership Models for Edmonton Buyers
Because the WF-P family is built at the Longgang source factory, all three tracks below come with the same frozen BOM and the same seven-year firmware window.
- Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
Entry to any of the three tracks starts with a sample batch and a peripheral validation run, and Canada partners usually convert within one quarter.
Frequently Asked Questions
Does the WF-P POS Android motherboard family support a dual-screen high definition POS with 4K promotion wall?
Answer: Yes. The dual-screen high definition POS with 4K promotion wall is a stock configuration on the WF-P POS Android motherboard family from AndroidSBC. All tiers are validated against the same firmware build and the same peripheral interface before shipment to Edmonton.
Which silicon tiers are available in the WF-P family for Canada buyers?
Answer: RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527 are all in production. The RK3399 tier specified here is validated for Canada compliance with the same evidence pack as the rest.
Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?
Answer: Yes, and the configuration is documented per lot. The Edmonton partner receives the interface map and the validation report with the shipment, so the counter can be wired without trial and error.
What is the minimum order quantity and the sample lead time for Canada?
Answer: Samples ship in 1-3 days and the sample MOQ is a single board. Volume production runs on a 15-30 day lead against the frame agreement, and the price list covers tiered volume breaks.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Available on all three tracks. AndroidSBC does AOSP builds, BSP porting, custom boot animation, custom logo and pre-installed apps, with the result held as the Edmonton partner reference image.
How are firmware updates delivered to a Canada estate after deployment?
Answer: Updates go out through the staged OTA channel bundled with the driver SDK. The Edmonton partner can hold lanes, pilot on ten, and revert any wave that misbehaves.
What shipping terms does AndroidSBC support for Canada orders?
Answer: FOB Shenzhen, CIF and EXW terms are all supported, with export customs clearance handled at the factory. The Edmonton partner chooses the Incoterm that matches its broker arrangement.
What happens if a board fails in the field in Canada?
Answer: AndroidSBC holds service stock for Edmonton partners on a frame agreement, so a failed board is replaced from that stock while the root-cause analysis runs in parallel.
Contact AndroidSBC: Start Your WF-P3399 Sourcing Conversation
AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-P family. Edmonton integrators can reach the export desk through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Edmonton and Canada buyers, with a 15-30 day mass-production lead on bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-P family.
