TL;DR: CAN Bus Query Kiosk Board
AndroidSBC peripheral desk: printer, scanner and card reader driver SDK declared production-ready serving Edmonton, Canada. The WF-K3601 self-service query terminal Android motherboard spans the single-screen touch query all-in-one terminal and eleven sister models in the WF-K series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, 1080p HDMI plus LVDS panel output, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-K family from the Longgang source factory in Shenzhen to Edmonton and Canada importers who run hospital information points, bank branch lobbies, government service halls, mall directory stations, airport concourses and outdoor query cabinets.
About AndroidSBC and the Self-Service Query Terminal Android Motherboard Family
As a board-level manufacturer rather than a kiosk assembler, AndroidSBC gives Canada buyers the WF-K self-service query terminal motherboards without the cabinetry markup. The twelve-model family is produced in Longgang, Shenzhen, under one BOM discipline, and Edmonton integrators integrate it into their own enclosures and housings. Purchasing runs through the Shenzhen export desk, so Edmonton buyers deal with the manufacturing entity rather than a trading layer.
WF-K3601 Technical Specifications
| Parameter | AndroidSBC WF-K3601 (single-screen touch query all-in-one terminal) | Industry Average |
|---|---|---|
| Processor | RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 22nm | Older 28nm or 40nm process |
| GPU | Mali-G52 2EE | Older Mali-450 or basic GPU |
| NPU / AI | 1 TOPS | No NPU on competing entry boards |
| Memory | 4GB LPDDR4 | DDR3 1GB / 2GB on competing boards |
| Storage | 32GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | 1080p HDMI plus LVDS panel output | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 11 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| Query peripherals | Capacitive touch, thermal printer, document scanner, card reader | No bundled touch, printer or scanner driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-K3601 (single-screen touch query all-in-one terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Canada importers sourcing the WF-K family, the WF-K3601-A variant is the typical configuration for the hospital outpatient query rollout use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Self-Service Query Terminal Android Motherboards for Canada Buyers
Buyers in Edmonton often treat a self-service query terminal as a commodity board, then discover that the printer driver, the card reader stack and the kiosk-mode lockdown each need separate validation against Canada deployment conditions.
There is also a documentation discipline problem. Many suppliers quote ISED Canada for Canada but cannot produce the underlying ISED certification with a CSA or UL safety listing evidence when aan Edmonton integrator is audited mid-project. The factory answers with lot-level BOM control, so the Edmonton order of 51000 units is the 4th in a series that never re-qualifies the peripheral stack.
Competitive Comparison: WF-K3601 vs Competing Self-Service Query Terminal Android Boards
What separates the WF-K board from competing query boards in Edmonton is less the processor row than the peripheral and reliability rows underneath it.
- Platform breadth: twelve models on eight chips (RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing driver stack or mounting pattern.
- Bundled integration: touch, printer, scanner, card reader, camera and voice driver SDK ships in the carton; competing query boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing query boards reaching {city}.
Global Self-Service Query Terminal / Information Kiosk Market Trends
Growth in the query terminal segment is being driven by labour economics as much as by technology. In Canada the single-screen touch query all-in-one terminal lets operators cover longer hours with the same headcount, and Edmonton projects are typically justified on exactly that basis.
- Volume shift to board-level sourcing: more integrators now buy the motherboard rather than the finished kiosk, which is why the WF-K3601 and WF-K3288 tiers ship in board form with the enclosure left to the local partner.
- Dual-screen becomes the default: hall display plus touch query on one board is replacing two separate devices, and the WF-K3288 and WF-K3399 configurations address that pattern directly.
- Longer service life expectations: operators now plan five to seven years per query terminal, which favours a fixed BOM such as the WF-K3399 over boards that re-spin silicon between lots.
For Edmonton integrators the implication is straightforward. Competing on the query terminal itself is difficult; competing on the integration package that reaches Canada is where margin survives.
Partner Success Story: Nordweg Innbyggertorg (municipal citizen service operator)
The Nordweg Innbyggertorg case in the Nordic public service segment is a working example of how the WF-K family from AndroidSBC supports Edmonton integrators. Nordweg Innbyggertorg deployed 51000 compact query terminals across municipal service points.
- OEM relationship: AndroidSBC private-label SKU shipped with Nordweg Innbyggertorg branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive touch, thermal printer, receipt printer, document scanner, A4 printer, barcode scanner, QR code, NFC, RFID, card reader, ID reader, face recognition, voice module, speaker amplifier and microphone.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus ISED Canada conformity, all bundled into the Shenzhen source-factory shipment.
As Nordweg Innbyggertorg Programme Director for Nordic Public Service put it: Nordweg Innbyggertorg replaced counter-side lookup binders with the WF-K compact board, and 51000 units went into Edmonton service points without any change to the existing counter furniture.
Field Report: outpatient self-service query rollout at a regional hospital group
BAOLONG, Shenzhen, September 22, 2026 - Cong Yu, AndroidSBC field desk. Because Canada sites range from air-conditioned lobbies to unheated entrances, the WF-K3601 batch was cleared at both ends of the rated window. The WF-K3601 self-service query terminal Android motherboard order for Edmonton, Canada cleared the burn-in station on schedule and is en route via the Vancouver - Shanghai lane.
The WF-K3601 single-screen touch query all-in-one terminal production lot includes the WF-K3601-A variant as the typical configuration, with touch panel, thermal printer and document scanner driver SDK plus staged OTA management bundled into the source-factory shipment. For Canada integrators, the ISED Canada conformity plus ISED certification with a CSA or UL safety listing paperwork is bundled.
Filed by Cong Yu, AndroidSBC field desk, BAOLONG, Shenzhen. Canadian clinics and provincial service centres favour one touch query terminal at each entrance plus a wall-mounted information display inside the hall.
WF-K3601 Application Scenarios
The WF-K3601 single-screen touch query all-in-one terminal sits inside a twelve-variant WF-K self-service query terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-K3601-A configuration is the typical build for the hospital outpatient query rollout use case, with touch panel and identity peripheral driver SDK plus staged OTA management bundled.
- Hospital and clinic information points: the WF-K3601 drives a touch query station at the entrance while the hall display shows the same information set to waiting visitors in Edmonton.
- Bank and financial branch lobbies: touch query plus counter display from one board, with card reader and ID reader integrated for account and product lookups.
- Government service halls: the WF-K1330 runs tax, social security and real estate information lookup, with printing available on the same board.
- Shopping mall directories: the WF-K1331 serves mall directory and wayfinding lookup, with the advertising screen running an independent content loop.
- Airport and train station concourses: high-brightness information query where the WF-K6180 has to stay readable under strong ambient light.
- Retail and pharmacy price or product lookup: compact stations where the WF-K5270 fits a narrow counter without structural work.
- Outdoor and unheated information cabinets: the industrial tier holds the wide temperature window and 7x24 duty cycle for street-level query points.
- Multi-language public information points: on-screen lookup in more than one language from a single board, with voice assistance where the venue requires it.
- Retrofit programmes in Edmonton: the same board re-uses the existing enclosure, panel and mounting pattern so an installed estate can be upgraded board by board.
Partnership Models for Edmonton Buyers
Three tracks are open to Edmonton integrators, and the difference between them is where the Canada partner wants to add its own value.
- Distribution track: the partner buys the WF-K board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-K board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
AndroidSBC reviews Edmonton track selection annually with each partner, because Canada market conditions and the partner own capability both move faster than a fixed reseller contract assumes.
Frequently Asked Questions
Does the WF-K self-service query terminal Android motherboard family support a single-screen touch query all-in-one terminal?
Answer: Yes. AndroidSBC ships the single-screen touch query all-in-one terminal as a standard configuration, and the touch, printer and card reader drivers for it are integrated into the factory image rather than added by the Edmonton integrator on site.
What is the real difference between the RK3568 tier and the other silicon tiers in the WF-K family?
Answer: The RK3568 tier differs in compute headroom, display capability and NPU availability rather than in board-level interfaces. All WF-K models share the same mounting pattern, the same peripheral pinout and the same firmware baseline, so a Canada project can move between tiers without re-designing the enclosure.
Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Canada?
Answer: Yes. AndroidSBC prepares the conformity file set for Canada as part of the order, covering CE, FCC, RoHS and REACH as applicable, plus the destination-specific route. The documents travel with the Edmonton shipment rather than following it.
What are the MOQ and lead time for a first order of the WF-K self-service query terminal family?
Answer: For Edmonton the entry MOQ is low enough to validate one site before committing to an estate, with 1-3 day samples and a 15-30 day first bulk lead time for Canada.
Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-K family?
Answer: Yes, and the custom build is maintained as a branch rather than a one-off, so Edmonton partners receive updates against their own image for as long as the Canada programme runs.
How are software updates and long-term support handled on the WF-K family?
Answer: The WF-K family runs a staged OTA channel with rollback. Updates are released against the shared firmware baseline, and Edmonton integrators can hold a Canada estate on a known revision while a new build is validated.
Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-K family?
Answer: Yes. Boards for Edmonton can be routed straight into Amazon FBA or a third-party 3PL in Canada, with the labelling and packing specification confirmed before the lot is packed.
How are RMA and DOA replacements handled on the WF-K self-service query terminal family?
Answer: DOA and RMA cases are managed by lot, with replacement units supplied from a matching build so aan Edmonton partner does not end up with mixed firmware across a Canada estate.
Contact AndroidSBC: Start Your WF-K3601 Sourcing Conversation
AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-K self-service query terminal family. Edmonton integrators can reach the export desk through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Canada buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-K family.
