TL;DR: Information Kiosk Board Export
AndroidSBC export desk: OEM, ODM and distribution tracks open on the WF-G smart guide kiosk board family serving Edmonton, Canada. The WF-G3602 smart guide kiosk Android motherboard spans the wayfinding information kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus eDP, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Edmonton and Canada importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.
About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family
The software side of the WF-G family is where a guide kiosk deployment is won or lost. AndroidSBC ships the boards on Android 10 through Android 15, plus Linux, Ubuntu and Debian images, with a common driver package for capacitive and IR touch controllers, barcode and QR engines, NFC readers, thermal printers, RFID readers, ID card readers, cameras and relay boards. A cloud content management client, a kiosk-mode lockdown layer and a staged OTA channel are part of the reference image, and the wayfinding and directory application interface is documented for integrators. For Edmonton and Canada development teams the practical effect is that the board arrives as a platform, not as a blank SoC with a datasheet. Certification, carton labelling and palletisation for Canada are prepared in Shenzhen by the export desk before the Edmonton shipment leaves, and the test reports stay versioned against the board revision.
WF-G3602 Technical Specifications
| Parameter | AndroidSBC WF-G3602 (wayfinding information kiosk) | Industry Average |
|---|---|---|
| Processor | RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 22nm low-power | Older 28nm or 40nm process |
| GPU | Mali-G52 2EE | Older Mali-450 or basic GPU |
| NPU / AI | 1 TOPS INT8 NPU | No NPU on competing entry boards |
| Memory | 4GB LPDDR4 | DDR3 1GB / 2GB on competing boards |
| Storage | 32GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | HDMI 2.0 4K 60fps plus eDP | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 12 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| Payment peripherals | QR code scanner, NFC, barcode scanner, thermal printer, cash drawer | No bundled payment-peripheral driver SDK on competing boards |
| Operating temperature | -10C to 60C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3602 (wayfinding information kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Canada importers sourcing the WF-G family, the WF-G3602-A variant is the typical configuration for the public venue wayfinding and route planning use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Canada Buyers
The first obstacle for Canada buyers is specification drift. A datasheet says RK3588 or RK3568, but the board that shows up on the Edmonton loading dock has different memory, a different display interface or a different Android build than the sample that was approved.
Dual-screen behaviour is a factory-set option. The WF-G family supports independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, and AndroidSBC validates the panel pairing before the lot ships to Edmonton, with ISED Canada conformity and ISED certification with a CSA or UL safety listing documentation attached for Canada importers at Port of Vancouver. For Edmonton and Canada the Vancouver - Shanghai lane remains the working option, and 164700 boards are booked on it as of September 18, 2026, the 4th such release this cycle.
Competitive Comparison: WF-G3602 vs Competing Smart Guide Kiosk Android Boards
A board quotation is easy to compare and a platform decision is not. For Edmonton integrators the WF-G family is usually measured against five-option or single-platform competitors on silicon coverage, dual-screen capability, thermal range and the update path that Canada rollouts depend on.
- vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
- vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
- vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
- vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.
Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends
Refresh cycles are lengthening, which favours multi-tier families. Analysts covering Canada retail and venue technology report that kiosk and directory estates are being specified for seven to ten years rather than three to five, and Edmonton programmes are following. That changes the wayfinding information kiosk question from which board is cheapest today to which vendor can still supply the same board, or a documented equivalent, in year eight.
- Mall floor directories and tenant finders: WF-G3602 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G8800 as the directory plus promotion option.
- Transit, hospital and campus wayfinding banks: the mid-tier WF-G8800 and the industrial WF-G8801 sister SKUs form the public venue ladder, with route planning and multi-language content.
- Promotional walls and in-venue signage networks: WF-G8801 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.
Two numbers decide a Canada guide kiosk programme: how many screens a venue actually needs, and how many years the estate has to be supported. AndroidSBC plans the WF-G family against both and shares the model with Edmonton integrators on request.
Partner Success Story: Nordweg Leit Systeme (transit wayfinding specialist)
A Nordweg Leit Systeme rollout in the Northern Europe transport segment shows how the WF-G smart guide kiosk Android motherboard family works in practice for Edmonton integrators. Nordweg Leit Systeme installed 164700 WF-G wayfinding boards across interchange concourses and platform entrances on a regional rail network.
- OEM relationship: AndroidSBC private-label SKU shipped with Nordweg Leit Systeme branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus ISED Canada conformity, all bundled into the Shenzhen source-factory shipment.
As Nordweg Leit Systeme Network Operations Lead for Northern Europe Transport explained: Nordweg Leit Systeme picked the WF-G because the route planner had to keep working after a mains dip, and the auto power-on and watchdog behaviour on the board removed a class of morning callouts for the 164700 screens now live across Canada.
Field Report: wayfinding kiosk bank installation at a transit interchange
LONGGANG, Shenzhen, September 18, 2026 - Chu Lin, AndroidSBC field desk. Each WF-G3602 board logged 20000 simulated directory searches and route queries on the test jig before the lot was cleared for Canada shipment. The WF-G3602 smart guide kiosk Android motherboard order for Edmonton, Canada cleared the burn-in station on schedule and is en route via the Vancouver - Shanghai lane.
The WF-G3602 wayfinding information kiosk production lot includes the WF-G3602-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Canada integrators, the ISED Canada conformity plus ISED certification with a CSA or UL safety listing paperwork is bundled.
Filed by Chu Lin, AndroidSBC field desk, LONGGANG, Shenzhen. ISED RSS-Gen plus CSA C22.2 No. 60950-1; supermarket chains in Quebec often specify bilingual EN-FR UI firmware.
WF-G3602 Application Scenarios
The WF-G3602 wayfinding information kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3602-A configuration is the typical build for the public venue wayfinding and route planning use case, with payment-peripheral driver SDK and OTA content management bundled.
- Shopping centre floor directories and tenant finders: WF-G3602 plus WF-G3288 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
- Compact countertop enquiry and price check terminals: WF-G3399 plus WF-G3602 are the usual pairing where housing depth is limited and the BOM target is fixed.
- Transit, hospital and campus wayfinding banks: WF-G1330 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
- AI product advisory walls and virtual try-on mirrors: WF-G1331 plus WF-G3288 cover the vision and recommendation workload on the device.
- Promotional walls and in-venue signage networks: WF-G3399 plus WF-G1331 ship for continuous-play directory and campaign screens tied to a content calendar.
- Hotel, resort and casino lobby directories: WF-G3288 plus WF-G1330 carry the guest orientation flow in Edmonton.
- Exhibition and museum interpretive display points: WF-G3602 is the compact SKU for exhibit-side content and catalogue browsing.
- Outdoor smart city information pillars: WF-G1331 is positioned for street-level and park cabinets where the temperature range has to hold.
- Venue programmes running in Edmonton: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.
Partnership Models for Edmonton Buyers
Entry into the WF-G family is available on three tracks for Edmonton and Canada buyers, and they are designed so a partner can move between them without re-qualifying the platform.
- OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
- ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
- Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.
For Canada partners the decision is commercial, not technical: the same WF-G board ships on all three tracks, and the difference is how much of it carries the partner brand in Edmonton.
Frequently Asked Questions
Does the WF-G smart guide kiosk Android motherboard family support a wayfinding information kiosk?
Answer: Yes. The WF-G smart guide kiosk Android motherboard family from AndroidSBC ships wayfinding information kiosk as a stock configuration. The Rockchip RK3588, RK3568, RK3566, RK3288 and RK3399 tiers and the Allwinner A133, H618 and T527 tiers all run the wayfinding information kiosk firmware baseline with the peripheral driver SDK bundled.
What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?
Answer: There are eight silicon options in the WF-G family and RK3568 is one of them. RK3588 leads on AI and multi-screen, RK3568 leads on I/O breadth, RK3566 leads on cost per screen, T527 leads on industrial temperature, RK3288 and RK3399 cover 28nm refreshes, and A133 and H618 lead on BOM. AndroidSBC keeps one firmware baseline across all eight so Canada integrators can mix tiers inside one venue estate.
Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Canada?
Answer: Yes. Paperwork is part of the product, not an extra. The WF-G family ships with the CE / FCC / RoHS / REACH set and with ISED Canada plus ISED certification with a CSA or UL safety listing for Canada, so Edmonton integrators can hand the dossier to a mall operator, a transit authority or an inspector on day one.
What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?
Answer: AndroidSBC accepts sample orders from one piece up on the WF-G family, with a 1-3 day sample lead. The OEM track opens at 100 pieces, the ODM track at 500 pieces, and bulk production runs 15-30 days from BOM sign-off.
Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?
Answer: Yes. AndroidSBC ports Android 10 through Android 15, plus Linux, Ubuntu and Debian, on every WF-G tier. Custom ROM work includes the boot animation, the kiosk lockdown layer, the update channel and the peripheral driver package for Canada deployments.
How are software updates and long-term support handled on the WF-G family?
Answer: Software support is treated the same way as hardware supply. The WF-G family carries a seven-year firmware commitment, remote configuration, telemetry hooks and staged rollout, so a Canada deployment can be managed as a fleet rather than as a set of screens.
Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?
Answer: Yes. AndroidSBC ships direct to Amazon FBA or a nominated 3PL for Canada buyers, on FOB Shenzhen, CIF Port of Vancouver or DDP terms, with serialised labels so each carton can be traced to a production lot.
How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?
Answer: Warranty handling is part of the source-factory relationship: DOA replacement from buffer stock, RMA repair or replacement at the Longgang facility, and a documented turnaround for Edmonton and Canada partners under the supply agreement.
Contact AndroidSBC: Start Your WF-G3602 Sourcing Conversation
AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-G family. Edmonton integrators can reach the export desk through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
For Edmonton and Canada buyers the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.
